Sign in
IsoFind Atlas · isotope reference

Published isotope signatures, deposit by deposit.

Focused on non-traditional isotopes, from lithium to uranium.

The Atlas gathers the isotope values published on ore deposits, on environments affected by mining and on fractionation. Each value keeps its uncertainty, the standard it was measured against, the mineral or matrix analysed and the paper it comes from. Everything is free to browse, with no account.

28,797Isotope valueseach with its source
8,611Reference pagesin English and French
6,162Deposits and siteslocated and classified
1,210Publicationsread one by one
366Standardsand reference materials

Data as of 5 November 2026

What the Atlas holds

Each section has its page in the reference

Where the measurements were made

One point per page

The map of the pages

Each point is an Atlas page, placed at the deposit or the site. Hover over it to see what was measured there, click to open its page.

The map also shows what is missing. Whole regions still have no published measurement for most non-traditional isotopes, and the Atlas does not fill these gaps with estimates: no point means no data.

World map of the Atlas pages

The points appear when the map reaches the screen.

Systems covered

Number of published values per element

Traditional stable isotopes

Hydrogen, carbon, nitrogen, oxygen and sulfur: fluid sources and temperatures.

Radiogenic systems

Lead, strontium, neodymium, osmium, hafnium and noble gases: ages and provenance.

Reading a page

An Atlas page, picked at random among the best documented

  1. The value and its rangeThe central value, its uncertainty as the paper gives it, the published range and the number of analyses.
  2. The standardThe one each δ value was measured against. A selector shows the page against another standard, when the offset between the two has been published.
  3. The mineral or matrixA sphalerite and a galena from the same deposit do not say the same thing: the material analysed is noted on every row.
  4. The sourceThe original paper, with its DOI. A value taken from a compilation, rather than from the paper that measured it, is flagged as such.
  5. The state of the pageWhat is missing is stated on the page, with a link to complete it: age, uncertainty, mineral, coordinates.

Browse, keep, analyse

Browsing stays free

No account

Free

  • The pages, the map, the search and the charts
  • Compare a measured value with those of a page or of a whole system
  • Show a page against another standard, from published offsets
  • The standards conversion, for a single value
  • The fractionation factors, and IGL models to run in the page
  • Cite a page, as text, BibTeX or RIS
Open the atlas

With an account

Free

  • Your in-house standard, and the pages shown against it
  • Collections of pages, frozen and citable
  • An encrypted history that only you can read
  • Alerts when new data arrives
  • Tokens to connect an AI assistant to the Atlas MCP server
  • Tracking of your contributions

With an email address and a password, or with an identifier and no address. Personal data is encrypted: IsoFind does not read it.

Create an account

Atlas access

€49 per year, excl. VATpublic research and teaching; €149 excl. VAT for commercial use

  • The full ranking of candidates, and their provenance probability with a goodness-of-fit test
  • Advanced multi-criteria search, and saved searches
  • Mixing between two or three sources
  • Batch conversions between standards, notations and ratios
  • Reference signatures by setting, and regional baselines
  • Correction of the processing steps of a concentrate or a metal
  • CSV and JSON exports, with values brought to the standard of your choice or to yours

The access is added to your account. It is meant for professionals and renews every year.

Add Atlas access

What it is used for

Ore provenance

Compare a concentrate or a metal with known deposits, as part of due diligence on critical raw materials.

Environmental forensics

Tell mining, smelting and natural inputs apart in water, sediments and soils, with Cu, Zn, Cd, Sb, Hg and Pb.

Metallogeny and exploration

Place new data within the range of a deposit type, and review what has been published on a district before fieldwork.

Archaeometallurgy

Lead, copper and tin isotopes from ancient mining districts, to discuss where metals came from.

Lithium and battery metals

Signatures of salars, geothermal brines, pegmatites and clays, from resource to product.

Teaching

Real, sourced data for isotope geochemistry courses, with fractionation curves to play with.

How values enter the Atlas

One value, one publication

Values are taken from peer-reviewed papers and public datasets, and each one points to its source. A doubtful DOI is not entered: it is checked first.

As published

The value, its uncertainty in the form the paper gives (2 SD, 2 SE, confidence interval) and its standard are kept as they are. Nothing is recalculated on entry.

A published calibration or nothing

A value only changes standard if the offset between the two standards has been measured and published. Otherwise it stays on its original scale, and the page says so.

Reviewed and dated

Submissions are reviewed before they enter. The Atlas is released in dated versions: a study can state the one it used, and find it again.

Next to other databases

Large geochemical compilations such as GEOROC or the EarthChem portal mostly gather compositions of igneous and metamorphic rocks. IsoBank brings together stable isotopes for ecology, archaeology and hydrology, and GeoReM documents reference materials.

The Atlas starts from another question: where does a metal, or a pollution, come from? It therefore organises the data around ore deposits, the environments they affect and the processes that link them, and treats metal stable isotopes as data in their own right. The two approaches complement each other: the Atlas cites the original papers, and its pages can be cross-checked with any other compilation.

Citing the Atlas

Ferrari, C. (ed.) (2026). IsoFind Atlas: isotope signatures of ore deposits, contaminated sites and fractionation, version of 5 November 2026. https://www.isofind.tech/isotopes/en/ (accessed 5 November 2026).

When you reuse a value, also cite the paper that measured it: each page gives its reference and DOI, and offers its own citation.

Reusing the data

Atlas data can be reused freely, with citation, for research, teaching and consulting. Two uses need an agreement: resale, and feeding another database.

Full terms

Frequently asked questions

Is the Atlas free?

Yes. The pages, the map, the search, the charts and the comparison of a value with the data of a page are free, with no account. An account, also free, keeps your in-house standard, your collections and your alerts. Atlas access, at €49 excl. VAT per year for public research and teaching or €149 excl. VAT for commercial use, adds the analysis tools: probable provenance, advanced search, source mixing, batch conversions, reference signatures and exports.

Do I need an account?

Not to browse. The account keeps what is yours from one visit to the next. It opens with an email address and a password, or with an identifier given by the server, with no address. Your address, your name and your in-house standard are encrypted with a key that only your session can rebuild: IsoFind does not read them.

Which isotope systems does the database contain?

Non-traditional isotopes: Boron (B), Uranium (U), Mercury (Hg), Thallium (Tl), Zinc (Zn), Tin (Sn), Antimony (Sb), Silver (Ag), Silicon (Si), Copper (Cu), Iron (Fe), Lithium (Li), Nickel (Ni), Titanium (Ti), Molybdenum (Mo), Cadmium (Cd), Vanadium (V), Gallium (Ga), Chlorine (Cl), Zirconium (Zr), Tungsten (W). Traditional stable isotopes: Oxygen (O), Sulfur (S), Carbon (C), Hydrogen (H), Nitrogen (N). Radiogenic systems: Lead (Pb), Strontium (Sr), Osmium (Os), Neodymium (Nd), Hafnium (Hf), Helium (He), Argon (Ar). The list follows the database: each element has its page, with its systems, its values and its fractionation factors.

Where does the data come from?

From peer-reviewed papers and public datasets. Each value is linked to its source, by its DOI when there is one, and the page states the standard and the material analysed when the paper gives them. Outside submissions are reviewed before they are added.

How are uncertainties given?

In the form published by the paper: 2 SD, 2 SE, 1 SD or confidence interval, with the type stated next to it. When a value is converted from one standard to another, the uncertainty of the offset between the two standards is given separately, at 2σ, and the measurement keeps its own.

How can values measured against different standards be compared?

From a published offset between the two standards, and only then. Each page offers to show its values against another standard, and the standards conversion page gives the offset, its uncertainty and its source. Without a published calibration, the conversion is refused.

Can I see the values on my laboratory's standard?

Yes. In your account, enter your measurements of a few reference materials against your standard: the page works out its position on the scale of the system. The pages can then be shown against your standard, and Atlas access exports give the converted values next to the published ones.

Does the Atlas contain fractionation factors?

Yes, sorted by element, process and pair of phases, with temperature, pH and type of study. The fractionation pages plot these factors against temperature or pH, and offer a Rayleigh or closed-system calculation. For redox reactions, a ready-to-run IGL model follows the reservoir as the reaction proceeds.

How do I submit data?

From the page concerned, or from the atlas: a missing value, a new deposit, a correction. Each submission points to a publication or a dataset that can be checked.

Can the database be downloaded?

Atlas access includes CSV and JSON exports, page by page, within daily limits. The data can be reused freely with citation, except for commercial use or to feed another database. A full export or programmatic access is covered by an agreement: write to colin.ferrari@isofind.tech.

Can an AI assistant query the Atlas?

Yes, through the Atlas MCP server. A token created in your account connects Claude, ChatGPT or another assistant to the database on your behalf; it opens the rights of your account, never your personal data.

Contribute

Have you published measurements?

They can enter the Atlas with their DOI, and your name on the page if you wish, after review. A missing value or an error can be reported from the page itself.

Submit data